OX - The world's first flat pack truck with Professor Gordon Murray, Executive Chairman, GMD, Huibert Vigeveno, Executive Vice President, Shell Global Commercial and Sir Torquil Norman, founder of GVT (left to right)
Shell is collaborating with Gordon Murray Design to make this mission happen
Shell has announced that it will commission a pre-production prototype of the world’s first flat-pack truck and it will take this truck to India, which is home to almost 18% of the world’s population1. The ‘OX to India’ mission will showcase the capabilities of the vehicle for bringing low-cost all-terrain mobility to rural communities in developing countries.
The ‘OX to India’ mission is a partnership between Shell and Gordon Murray Design (GMD), working in close alignment with the Global Vehicle Trust (GVT). This represents a crucial development stage of the vehicle, which was officially launched in 2016.
Shell will fund a bespoke prototype OX to take to India and will set up an outreach programme once the vehicle is in India. The vehicle will be re-engineered and built by GMD, and flat-packed for shipment to India in the later part of 2018.
The OX, based on GMD’s flexible iStream® technology, will run exclusively on Shell fluids including Shell Rimula, a hard-working and high-performing diesel engine oil designed to help heavy duty and light duty engines to run efficiently in demanding conditions.
“Shell is eager to play a role alongside others in developing and promoting mobility solutions in developing regions. The OX to India demonstration will see the concept validated and discussed on the ground in a real world setting. We know limited mobility in hard-to-reach communities in developing economies can restrict access to basic services, and can limit the effectiveness of efforts to improve the quality of life. The OX has the potential to broaden access to transport possibilities and all the resulting benefits that come with this,” said Huibert Vigeveno, Executive Vice President, Shell Global Commercial.
The OX is designed to carry a payload of 1,900kg (approximately twice the capacity of most current pickups), which could include everyday necessities, medical supplies, building and agriculture materials. It can seat up to 13 people. The vehicle was envisioned by entrepreneur and philanthropist Sir Torquil Norman and designed by renowned automotive engineer Professor Gordon Murray.
Other innovative features of the OX include:
Sir Torquil Norman, founder of GVT said: “I’m so pleased to welcome Shell aboard the OX project and for sharing GVT's vision that this remarkable and versatile vehicle will provide a transformation in affordable mobility for so many people where the need is most acute. With Shell taking the OX to India we can demonstrate its capability in a key market, which will help attract long-term production partners.”
Professor Gordan Murray, Executive Chairman, GMD said: “After our highly successful co-engineering Shell Concept Car programme with Shell, it is exciting to be once again working with Shell on the next phase of this extremely important and ground-breaking project.The OX is one of our most important engineering designs and it is certainly the vehicle of which I am most proud of, as its disruptive design has the potential to change the current mobility model and with Shell’s vision this vehicle could go on to improve so many people’s lives.”
Recognising the need for sustainable, cleaner and more energy efficient transportation solutions, Shell is collaborating and co-engineering a number of projects. In 2016, Shell partnered with Gordon Murray to coengineer the Shell Concept Car – an ultra-efficient city vehicle that, compared to a typical city car, uses 34% less primary energy over its entire lifetime. Shell is also partnering with AirFlow Truck Company to develop a new hyper-fuel mileage Class 8 truck known as the Starship. Its aerodynamic design will seek to demonstrate improvements in fuel economy for while lowering CO2 emissions.
Gordon Murray Design Limited:
Sarah Smith, +44 (0) 1483 484700, email@example.com
Global Vehicle Trust:
Ed Callow, PFPR Communications, +44 (0)1622 766520, firstname.lastname@example.org
Notes to Editors:
Royal Dutch Shell plc
Royal Dutch Shell plcis incorporated in England and Wales, has its headquarters in The Hague and is listed on the London, Amsterdam, and New York stock exchanges.Shell companies have operations in more than 70 countries and territories with businesses including oil and gas exploration and production; production and marketing of liquefied natural gas and gas to liquids; manufacturing, marketing and shipping of oil products and chemicals and renewable energy projects. For further information, visit www.shell.com.
About Gordon Murray Design Limited
Gordon Murray Design Limitedis a British company operating from Shalford, Surrey. The Company is recognised as a world leader in automotive design and reverses the current industry trend for sub-contracting by having a complete in-house capability for design, engineering, prototyping and development. The Company is compact and focused and undertakes automotive and other engineering programmes in an efficient and innovative way. For more information please visit www.gordonmurraydesign.com.
The iStream® technology is a complete rethink and redesign of the traditional automotive manufacturing process and could potentially be the biggest revolution in high volume manufacture since the Model T. Development. The process began over 15 years ago and it has already won the prestigious ‘Idea of the Year’ award from Autocar who were given privileged access in order to make their assessment. The simplified assembly process means that the manufacturing plant can be designed to be 20% of the size of a conventional factory. This could reduce capital investment in the assembly plant by approximately 80%. Yet the flexibility of this assembly process means that the same factory could be used to manufacture different variants. The iStream® design process is a complete re-think on high volume materials, as well as the manufacturing process and will lead to a significant reduction in full lifecycle CO2. For more information please visit www.istreamtechnology.co.uk
About the Global Vehicle Trust
In 2010, Sir Torquil Norman founded the Global Vehicle Trust (GVT) to pursue his ambition to help people in the developing world by providing cost-effective mobility for all. The GVT subsequently briefed renowned automotive designer Professor Gordon Murray on a unique humanitarian programme to create a revolutionary lightweight truck. As part of an aid programme, the Global Vehicle Trust OX could provide an essential element of infrastructure to enable the local population to raise the community’s standard of living, and to assert its independence by gaining control of its transportation needs and costs.
Sir Torquil Norman is a former pilot, banker, company executive and toy manufacturing entrepreneur. He is a passionate philanthropist, and is chiefly responsible for the rescue and renovation of The Roundhouse in Camden, north London.
The companies in which Royal Dutch Shell plc directly and indirectly owns investments are separate legal entities. In this press release “Shell”, “Shell group” and “Royal Dutch Shell” are sometimes used for convenience where references are made to Royal Dutch Shell plc and its subsidiaries in general. Likewise, the words “we”, “us” and “our” are also used to refer to Royal Dutch Shell plc and subsidiaries in general or to those who work for them. These terms are also used where no useful purpose is served by identifying the particular entity or entities. ‘‘Subsidiaries’’, “Shell subsidiaries” and “Shell companies” as used in this press release refer to entities over which Royal Dutch Shell plc either directly or indirectly has control. Entities and unincorporated arrangements over which Shell has joint control are generally referred to as “joint ventures” and “joint operations”, respectively.Entities over which Shell has significant influence but neither control nor joint control are referred to as “associates”. The term “Shell interest” is used for convenience to indicate the direct and/or indirect ownership interest held by Shell in an entity or unincorporated joint arrangement, after exclusion of all third-party interest.
This press release contains forward-looking statements (within the meaning of the U.S. Private Securities Litigation Reform Act of 1995) concerning the financial condition, results of operations and businesses of Royal Dutch Shell. All statements other than statements of historical fact are, or may be deemed to be, forward-looking statements. Forward-looking statements are statements of future expectations that are based on management’s current expectations and assumptions and involve known and unknown risks and uncertainties that could cause actual results, performance or events to differ materially from those expressed or implied in these statements. Forward-looking statements include, among other things, statements concerning the potential exposure of Royal Dutch Shell to market risks and statements expressing management’s expectations, beliefs, estimates, forecasts, projections and assumptions.
These forward-looking statements are identified by their use of terms and phrases such as “aim”, “ambition’, ‘‘anticipate’’, ‘‘believe’’, ‘‘could’’, ‘‘estimate’’, ‘‘expect’’, ‘‘goals’’, ‘‘intend’’, ‘‘may’’, ‘‘objectives’’, ‘‘outlook’’, ‘‘plan’’, ‘‘probably’’, ‘‘project’’, ‘‘risks’’, “schedule”, ‘‘seek’’, ‘‘should’’, ‘‘target’’, ‘‘will’’ and similar terms and phrases. There are a number of factors that could affect the future operations of Royal Dutch Shell and could cause those results to differ materially from those expressed in the forward-looking statements included in this press release, including (without limitation): (a) price fluctuations in crude oil and natural gas; (b) changes in demand for Shell’s products; (c) currency fluctuations; (d) drilling and production results; (e) reserves estimates; (f) loss of market share and industry competition; (g) environmental and physical risks; (h) risks associated with the identification of suitable potential acquisition properties and targets, and successful negotiation and completion of such transactions; (i) the risk of doing business in developing countries and countries subject to international sanctions; (j) legislative, fiscal and regulatory developments including regulatory measures addressing climate change; (k) economic and financial market conditions in various countries and regions; (l) political risks, including the risks of expropriation and renegotiation of the terms of contracts with governmental entities, delays or advancements in the approval of projects and delays in the reimbursement for shared costs; and (m) changes in trading conditions. No assurance is provided that future dividend payments will match or exceed previous dividend payments.All forward-looking statements contained in this press release are expressly qualified in their entirety by the cautionary statements contained or referred to in this section. Readers should not place undue reliance on forward-looking statements. Additional risk factors that may affect future results are contained in Royal Dutch Shell’s 20-F for the year ended December 31, 2017 (available at www.shell.com/investor and www.sec.gov). These risk factors also expressly qualify all forward looking statements contained in this press release and should be considered by the reader.Each forward-looking statement speaks only as of the date of this press release, 11 April 2018. Neither Royal Dutch Shell plc nor any of its subsidiaries undertake any obligation to publicly update or revise any forward-looking statement as a result of new information, future events or other information. In light of these risks, results could differ materially from those stated, implied or inferred from the forward-looking statements contained in this press release.
We may have used certain terms, such as resources, in this press release that United States Securities and Exchange Commission (SEC) strictly prohibits us from including in our filings with the SEC.U.S. Investors are urged to consider closely the disclosure in our Form 20-F, File No 1-32575, available on the SEC website www.sec.gov.